Can You Clean A Shower Valve Due To Leakung

Valve Body Cleaning and Flushing

Final updated
Save as PDF

When installing a new cartridge, Moen recommends the valve body be cleaned and flushed out. This eliminates whatsoever mineral build-upwards and loose debris that may take accumulated inside the valve trunk . This debris could harm the new cartridge or obstruct the catamenia of water. The instructions beneath are based on the production type,Deckmount or Wallmount Faucets.

Please note that the h2o may come out of the valve body with considerable forcefulness, follow the steps below to control the flushing process.

Grooming:

The following instructions presume the handle, associated handle pieces and cartridge have been removed. For additional information visit Solutions.moen.com and select the type you are repairing.
Recommended Tools: Nylon bristle castor (ex: toothbrush or bottle brush), paper towels. (If yous are working on a Deckmount Faucet, y'all will also need a towel and a large bowl)
You may need two people for Deckmount Faucets, review pace iii:Begin the Flushing Process.

Instructions:	Deckmount Faucets:	Wallmount Faucets:
1. Prepare the Area	Wrap a towel effectually the base of operations of the faucet and have a large bowl ready.	Does not utilise.
2. Clean the Valve Body	Gently scrub the inside walls of the valve torso with a nylon bristle brush to remove whatsoever mineral build-up.	Gently scrub the inside walls of the valve body with a nylon bristle brush to remove any mineral build-up.
three. Begin the Flushing Process	To articulate the system, water will demand to be forced through the valve body. 1 person will position a large basin upside downward over the open valve body to redirect the water back into the sink. A 2d person will need to turn the h2o on slightly to allow a small catamenia of water to become through the system. If you are using hot and common cold shutoff'due south, this procedure will demand to be repeated (ane at a time) for both sides.	To clear the system, water will need to exist forced through the valve body. Equally a safety precaution, Moen recommends standing outside of the tub or shower when the faucet shutoff's or water master supplies are turned on. Turn the water on slightly to allow a small flow of water to become through the arrangement. If you are using hot and cold shutoff'due south, this process will demand to be repeated (1 at a fourth dimension) for both sides.
iv. Fix for Cartridge Installation	Using a rolled up paper towel, remove whatsoever excess water from the bottom of the valve body. If the water is not eliminated, the cartridge volition non fit all the way back in.	Using a rolled upwards paper towel, remove any backlog water from the back of the valve body. If the water is non eliminated, the cartridge will not fit all the way back in.
five. Install the Cartridge	For boosted information on Moen products visit solutions.moen.com and select the blazon of product yous are repairing. The guide will contain repair details, troubleshooting and specific data on assembling handles associated with that style of product.	For boosted information on Moen products visit solutions.moen.com and select the blazon of production you are repairing. The guide will contain repair details, troubleshooting and specific data on assembling handles associated with that style of product.